Delta RPI H3A User Manual

4 Installation
4.1 Installation Location
The unit should not be installed in direct sunlight.
CAUTION !
WARNING !
Do not install the unit near or on flammable surfaces.
Please mount the unit tightly on a solid/smooth surface
4.2 Mounting
This unit is designed to be wall-mounted. Please ensure the installation is perpendicular
to the floor and the AC plug located at the base of the unit. Do not install the device on
a slanting wall. The dimensions of the mounting bracket are shown in the figure below.
8 ofφ5.5mm screws are required for the mounting plate(hole size: φ6.5mm). Fix the
supplied wall-mount plate securely on the wall before attaching the inverter onto the
mounting plate.
14
Installation

Delta RPI H3A Specifications

General

Brand	Delta
Model	RPI H3A
Category	Inverter
Language	English