Delta RPI H3A User Manual

7.2 Inverter Setting
7.2.1 Country Setting
Upon first start-up of the device, Country selection is required.
1. In the country setting page, press “SEL” button (NEXT) to select your country, press
“ENT” button to confirm this page.
2. Press “Enter” button to confirm your country setting.
NOTE:
7.2.2 Connecting the Communication Wiring
Multiple inverters can be monitored via the inverter’s RS-485 connection (Figure 5-6),
but each inverter’s ID must be assigned a unique value.
Country
XXX
01 : Italy
Next / Enter
Italy
N / Y
Figure 7-1: LVRT characteristic
Make sure the inverter ID is different from each other in the same RS485 chain.
NOTE
30
Turn PV inverter on/off

Delta RPI H3A Specifications

General

Brand	Delta
Model	RPI H3A
Category	Inverter
Language	English