To Next Page

To Previous Page

Chapter 5 Operation Modes

5.5 Setup Mode

Press the scrolling button for more than 3 seconds and the LCD will go into the

setup menu.

Please note that only qualied service personnel can perform setup action. In setup

mode, you can set up the following items:

1. Inverter voltage

2. Inverter frequency

3. Bypass range

4. Buzzer disable

5. Overload alarm

For setup procedures, please refer to the following:

1. Press the

button for more than 3 seconds to enter into the setup mode.

2. Press the

button for 0.1 second to change the parameter.

3. Press the

button for 0.1 second to conrm your parameter

4. Press the

button for 0.1 second to go to the next setup item.

5. You can skip to the next setup item by pressing the

button for 0.1 second.

6. In setup mode, press the

button for more than 3 seconds, the LCD

will go

back to the original display.

7. In setup mode, if you don’t press any button for more than 2 minutes, the LCD

will exit from the setup mode and go back to the original display automatically.

For some settings, they can’t be set in certain operation modes. Please refer to the

table below for relevant information.

Setup

Item

Standby

Mode

On-line

Mode

Bypass

Mode

Battery

Mode

Inverter Voltage Setup

Inverter Frequency Setup

Bypass Range Setup

Buzzer Disable Setup

Overload Alarm Setup

Brand	Delta
Model	UPS102N2002N0B0
Category	UPS
Language	English

Delta UPS102N2002N0B0 User Manual

Table of Contents

Questions and Answers:

Delta UPS102N2002N0B0 Specifications

Related product manuals