ENGLISH
31
Advanced Operation
ENGLISH
Remote control unit
Operating DENON audio components
1. CD player (CD), CD recorder and MD recorder (CDR/MD)
system buttons
Advanced Operation
1
Set the MODE 1 switch to “AUDIO”.
2
Set the MODE 2 switch to the position for the
component to be operated (CD, CDR/MD or
TAPE).
3
Operate the audio component.
For details, refer to the component’s operating instructions.
While this remote control is compatible with a wide range of
infrared controlled components, it may be the case that
some component models cannot be operated with this
remote control.
6, 7 :Manual search (forward and reverse)
2 : Stop
1 :Play
8, 9 : Auto search (cue)
3 : Pause
DISC SKIP + : Switch discs (for CD changers only)
2. Tape deck (TAPE) system buttons
6 : Rewind
7 : Fast-forward
2 : Stop
1 : Forward play
0 : Reverse play
A/B : Switch between decks A and B
3. Tuner system buttons
SHIFT : Switch preset channel range
CHANNEL +, – :Preset channel up/down
TUNING +, – :Frequency up/down
BAND : Switch between the AM and FM bands
MODE :Switch between auto and mono
MEMORY :Preset memory
To Next Page
Loading...
Need help?
Power Amplifier Section
