ENGLISH
PageDefault settingSpeaker Setup
PageDefault settingAuto Setup
49
Advanced Setup – Part 2 Advanced Setup – Part 2
ENGLISH
System setup items and default values (set upon shipment from the factory)
1. Auto Setup
2. Speaker Setup
1
3
Speaker
Config.
Crossover
Frequency
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE
for full-size, full-range) to automatically set the composition
of the signals output from the speakers and the frequency
response.
Sets the frequency (Hz) below which the bass sound of
the various speaker is to be output from the subwoofer.
Front Sp.
Large
Center Sp. Surround Sp. Subwoofer
Small SmallYes
Surround Back
Sp.
Small / 2sp
4
Channel
Level
This adjusts the volume of the signals output from the
speakers and subwoofer for the different channels in order
to obtain optimum effects.
SW Mode
Setup
This selects the subwoofer speaker for playing deep bass
signals.
5
LFE (Normal)
45
2
Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position.
46, 47
47
48
Front
L & R
Center
Surround
L & R
Subwoofer
12 ft
12 ft 10 ft12 ft
Surround Back
L & R
10 ft
46
Front
L
Front
R
Center Surround R Subwoofer
0 dB 0 dB 0 dB 0 dB 0 dB
Surround L
0 dB
Surround
Back R
0 dB
Surround
Back L
0 dB
80 Hz
Input Setup
3. Input Setup
1 Auto Setup
Set this to switch the surround back
channel’s power amplifier for ZONE2 or Bi-
Amp use .
SURROUND BACK
8~11
Power Amp
Assign.
PageDefault setting
40
Digital In
Assign.
This assigns the digital input terminals for the
different input sources.
Input
source
Digital
Inputs
CD AUX DVD / VDP TV / DBS
COAX1 COAX2 OPT1 OPT2
1
2
Ext In SW
Level
Sets the Ext. In Subwoofer terminal playback level.
Subwoofer = +15 dB
40
Input
Function
Level
The playback level can be corrected individually for the
different input sources.
TUNER AUXCD CDR / TAPE DVD / VDP TV / DBS
0 dB 0 dB0 dB 0 dB 0 dB 0 dB
3
VCR
0 dB
V. AUX
0 dB
4
Function
Rename
The names of the different input source can be changed as
desired and displayed on the display.
41
5
Video Input
Mode
Set the input signal to be output from the monitor output
terminal.
AUTO
42
6
Auto Tuner
Preset
FM stations are received automatically and stored in the
memory.
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 MHz
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, 90.1 / 90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
F1 ~ F8
G1 ~ G8
90.1 MHz
90.1 MHz
42
40
TUNER AUXCD CDR DVD TV VCR V. AUX
To Next Page
Loading...
Need help?
Power Amplifier Section
