2
ENGLISH
ENGLISH
Speaker Setup
Setting the Speaker Configuration ·········································54, 55
Setting the Subwoofer Setup ······················································55
Setting the Distance ······························································55, 56
Setting the Channel Level······················································56, 57
Setting the Crossover Frequency ················································57
Troubleshooting······································································
65, 66
Additional Information···························································
63, 64
Specifications················································································
66
List of preset codes············································End of this manual
Operating DENON audio components ·······································58
Setting the preset memory function··········································58
Operating a component stored in the preset memory····59 ~ 61
Setting the punch through function···········································62
Advanced Setup – Part 2
Operating the remote control unit
System setup items and default values ····························43 ~ 45
Navigating through the System Setup Menu ···························46
About the on screen display and front display ·························47
Audio Input Setup
Setting the Digital In Assignment ················································47
Setting the EXT IN Subwoofer Level ···········································48
Setting the iPod Assignment ·······················································48
Setting the Input Function Level··················································48
Setting the Function Rename ······················································49
Setting the Tuner Presets ······················································49, 50
Video Setup
Setting the Component In Assignment ·······································51
Setting the Video Convert····························································51
Setting the Audio Delay ·······························································51
Setting the On Screen Display (OSD) ··········································52
Advanced Playback
Setting the 2ch Direct/Stereo ······················································52
Setting the Auto Surround Mode·················································52
Option Setup
Setting the Power Amplifier Assignment ····································53
Setting the Volume Control··························································53
Setting the Setup Lock ································································54
Advanced Setup – Part 1
Accessories
Check that the following parts are attached in addition to the main
unit:
q Operating instructions ..............................................................1
w Warranty (for North America model only).....................................1
e Service station list ....................................................................1
r Remote control unit (RC-1046).................................................1
t R6P/AA batteries ......................................................................2
y AM loop antenna ......................................................................1
u FM indoor antenna ...................................................................1
i Setup microphone (DM-S205) (Approx. 20 ft / 6 m) ................1
Getting Started
Before using
Pay attention to the following before using this unit:
• Moving the unit.
To prevent short-circuits or damaged wires in the connection cables,
always unplug the power supply cord and disconnect the connection
cables between all other audio components when moving the unit.
• Cautions on using mobile phones.
Using a mobile phone near this unit may result in noise. If so, move
the mobile phone away from this unit when it is in use.
•Before turning the power operation button on.
Check once again that all connections are correct and that there are
not problems with the connection cables. Always set the power
operation button to the standby position before connecting and
disconnecting connection cables.
• Store these instructions in a safe place.
After reading, store this instructions along with the warranty card in
a safe place.
• Whenever the power operation button is in the STANDBY state,
the unit is still connected to AC line voltage.
Please be sure to turn off the power operation button or unplug
the cord when you leave home for, say, a vacation.
• Note that the illustrations in these instructions may differ from
the actual unit for explanation purposes.
To Next Page
Loading...
Need help?
General
