Advanced Setup – Part 1 Advanced Setup – Part 1
52
ENGLISH
ENGLISH
Advanced Playback
Setting the 2ch Direct/Stereo
Make the 2-channel direct mode and stereo mode speaker settings.
Press
DD HH
to select “Advanced Playback”, then press
ENTER.
Press
DD HH
to select “2ch Direct / Stereo”, then press
ENTER.
1
2
3
Press
DD HH
to select the item, then press
FF GG
to set.
For a description of the settings for the different items, see pages
54 ~ 57.
Basic:
The “Speaker Setup” settings are displayed.
Custom:
The speaker settings for the 2-channel direct and stereo modes can
be changed.
4
Press ENTER.
5
Press
FF GG
to select “Basic” or “Custom”.
1
2
3
4
Setting the Auto Surround Mode
Set whether or not to store the surround mode last played for the
input signal.
The surround mode used at last for the three types of input signals
shown below is stored in the memory, and the signal is automatically
played with that surround mode the next time it is input.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other multi-channel
format (DOLBY PLIIx Cinema)
e Multi-channel signals of Dolby Digital, DTS or other multi-
channel format (DOLBY/DTS SURROUND)
Default settings are indicated in ( ).
Press
DD HH
to select “Auto Surround Mode”, then
press ENTER.
Press
FF GG
to set.
Press ENTER.
1
2
3
1
2
Setting the On Screen Display (OSD)
Set whether or not to display the on screen display for indications
other than the menu screens.
Press
DD HH
to select “On Screen Display”, then press
ENTER.
Press
DD HH
to select the item, then press
FF GG
to set.
Function/Mode Status:
• ON, OFF:
Select “ON” to display the on screen display when the input source
is selected, “OFF” if you do not want to display it.
Master Volume Status:
• ON, OFF:
Select “ON” to display the on screen display when the main volume
is adjusted, “OFF” if you do not want to display it.
Display Mode:
• MODE1:
Flickering is not prevented.
• MODE2:
Prevents flickering of the on screen display when there is no video
signal.
Use this mode if the on screen display is not displayed in “MODE1”.
Press ENTER.
1
2
3
1
2
To Next Page
Loading...
Need help?
General
