EasyManuals Logo
Home>Denon>Stereo Receiver>AVR-1911

Denon AVR-1911 User Manual

Denon AVR-1911
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
18
ENGLISH
Connecting a control dock for iPod
Connect a control dock for iPod to the unit to enjoy video and music stored on an iPod.
For a control dock for iPod, use ASD-1R, ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51W made by
DENON (sold separately).
For instructions on the control dock for iPod settings, refer to the control dock for iPod’s operating
instructions.
R
L
R
L
ASD-51N
Control dock for iPod
Use the AV/Control
Cable supplied with
the DENON control
dock for iPod.
Set this to change the digital input connector to which the input source is assigned.
“Input Assign” (vpage46)
in Set as Necessary
You can also connect the iPod you are using directly to the USB port of this unit (vpage18 “Connecting
an iPod or USB memory device to the USB Port”).
Connecting an iPod or USB memory device to the USB
Port
You can enjoy music, stored on an iPod or USB memory device.
Cables used for connections
To connect an iPod to this unit, use the USB cable supplied with the iPod.
USB memory
device
iPod
or
When you want to playback a video file stored on an iPod, use a DENON control dock for iPod (ASD-1R,
ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51W, sold separately) (vpage18 “Connecting a control
dock for iPod”).
With iPods, playback is possible with iPhone, iPod touch, classic and nano released from the 5th-generation
of iPods. For details, check the DENON web site or page 22.
DENON does not guarantee that all USB memory devices will operate or receive power. When using
a portable USB connection type HDD of the kind to which an AC adapter can be connected to supply
power, use the AC adapter.
NOTE
USB memory devices will not work via a USB hub.
Do not use an extension cable when connecting a USB memory device. This may cause radio interference
with other devices.

Table of Contents

Other manuals for Denon AVR-1911

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1911 and is the answer not in the manual?

Denon AVR-1911 Specifications

General IconGeneral
Frequency range10 - 100000 Hz
Audio output channels7.1 channels
Audio A/D Converter (ADC)24-bit/96kHz
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.8 %
HDMIYes
Audio systemDolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, DTS-HD, DTS 96/24
Output power125 W
Dimensions (WxDxH)434 x 381 x 171 mm
Power requirementsAC 230, 50 Hz
HDMI ports quantity5
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
I/O ports1 x Component in 1 x Composite Monitor out 1 x USB 1 x Microphone 1 x FM Tuner Antenna 1 x AM Tuner Antenna
Connectivity technologyWired
Headphone outputs7
Digital audio optical in1
Product colorBlack
Power consumption (standby)0.1 W
Power consumption (typical)460 W
Weight and Dimensions IconWeight and Dimensions
Weight10200 g

Related product manuals