41
ENGLISH
Basic versionSimple version InformationAdvanced version
Menu map
For menu operation, connect a TV to this unit and
display the menu on the TV screen. For menu
operations, see the following page.
How to make detailed settings
Setting items Number Detailed items Description Page
1. Audio Adjust
1.Audio Adjust
1.Surround Parameter
2.Tone
3.Audyssey Settings
4.Manual EQ
6.Audio Delay
5.RESTORER
[ENT]:Select [RTN]:Back
1-1 Surround Parameter Adjuts surround sound parameters. 49
1-2 Tone Adjuts the tonal quality of the sound. 51
1-3 Audyssey Settings Makes MultEQ
®
, Dynamic EQ
®
and Dynamic Volume™ settings. 51
1-4 Manual EQ Uses the graphic equalizer to adjust the tone of each speaker. 53
1-5 RESTORER Uncompresses compressed sources and apply bass boost for richer
sound.
53
1-6 Audio Delay Compensates for incorrect timing between video and audio. 53
2. Information
2.Information
1.Status
2.Audio Input Signal
3.HDMI Information
4.Auto Surround Mode
6.Preset Channel
5.Quick Select
[ENT]:Select [RTN]:Back
2-1 Status Shows information about current settings. 61
2-2 Audio Input Signal Shows information about audio input signals. 61
2-3 HDMI Information Displays the HDMI input/output signals and HDMI monitor
information.
61
2-4 Auto Surround Mode Displays the settings stored for the auto surround mode. 61
2-5 Quick Select Displays the settings stored for the Quick Select function. 61
2-6 Preset Channel Shows information about tuner preset channels. 61
3. Auto Setup
3.Auto Setup
1.Audyssey Auto Setup
2.Parameter Check
[ENT]:Select
3-1 Audyssey Auto Setup Makes the optimum settings for the speakers being used
automatically.
6
3-2 Parameter Check Checks Audyssey Auto Setup measurement results.
This item is only displayed after Audyssey Auto Setup procedure has
been performed.
10
4. Manual Setup
4.Manual Setup
1.Speaker Setup
2.HDMI Setup
3.Audio Setup
4.ZONE2 Setup
5.Option Setup
[ENT]:Select [RTN]:Back
4-1 Speaker Setup Sets the speaker size and distance, the channel level, etc. 54
4-2 HDMI Setup Makes settings for HDMI video/audio output. 57
4-3 Audio Setup Makes settings for audio playback. 57
4-4 ZONE2 Setup Makes settings for audio playback in a ZONE2 system. 58
4-5 Option Setup Makes various other settings. 59
5. Input Setup
–
Auto Preset Uses the auto preset function to program radio stations. 45
Preset Skip Sets the preset memories that you do not want to display when
tuning.
45
Preset Name Assigns name to a preset memory. 46
Input Assign Changes input connector assignment. 46
Video Makes the video settings. 47
Input Mode Sets the audio input mode and decode mode. 48
Rename Changes the display name for this source. 48
Source Level Adjusts the playback level of the audio input. 48
Playback Mode Makes settings for iPod or USB memory device playback. 48
MENU
1.Audio Adjust
2.Information
3.Auto Setup
4.Manual Setup
5.Input Setup
[ENT]:Select
Items that only need to be set
once
Set these for example upon purchase.
Once these items are set, there is
no need to set them again unless
the speaker layout or the connected
speakers have been changed.
Displayed items of the “Input Setup” menu differs,
depending on the selected input source.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
