Denon AVR-2112CI User Manual

72
Quick select function
It is also possible to save four settings for ZONE2.
nSaving the settings
1
Set the items below to the settings you want to save.
q Input source (vpage71)
w Volume (
vpage71)
NOTE
The settings for each content (Internet Radio, Media Server,
iPod, etc.) cannot be memorized for the “NET/USB” source of
ZONE2.
2
Press ZONE SELECT to switch the
zone mode to
K (ZONE2).
3
In the zone mode for which
you want to operate, press and
hold the desired
QUICK SELECT
until “Memory” appears on the
display.
The current settings will be memorized.
GQuick select defaultsH
Input source Volume
ZONE2 QUICK SELECT 1 BD –40dB
ZONE2 QUICK SELECT 2 SAT/CBL –40dB
ZONE2 QUICK SELECT 3 ––
ZONE2 QUICK SELECT 4 NET/USB –40dB
nRecalling the settings
1
Press ZONE SELECT to switch the
zone mode to
K (ZONE2).
2
Press QUICK SELECT at which
the settings you want to call out
are saved.
Naming quick select settings
See “Quick Sel.Name” (vpage96).
Sleep timer function
This is useful when you want to sleep while listening in ZONE2.
1
Press ZONE SELECT to switch the
zone mode to
K (ZONE2).
2
Press SLEEP and display the time
you want to set.
tThe time switches as shown below each
time
SLEEP is pressed.
OFF 10 min 20 30 40 50
6080 7090100
110
120
tIf SLEEP on the main unit is pressed, the same function as with the
remote control unit can be obtained.
To confirm the countdown time before putting the
unit to sleep
Press SLEEP.
“Z2 Sleep : zmin” appears on the display.
z Countdown time
To cancel the sleep timer
Press SLEEP to set “OFF”.
The sleep timer is also canceled when this unit is set to the standby
mode or the ZONE2 power is turned off.
Basic version Advanced version InformationAdvanced version

Denon AVR-2112CI Specifications

General

Brand	Denon
Model	AVR-2112CI
Category	Receiver
Language	English