Denon AVR-X1100W User Manual

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Dialog Level This setting adjusts the output level to clarify the dialogue output from the center
channel.
134
Subwoofer Level This setting adjusts the volume level for the subwoofer. 134
Surr.Parameter Adjusts surround sound parameters.
135
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
139
Audio Delay Compensates for incorrect timing between video and audio. 140
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 140
Audyssey
Makes Audyssey MultEQ
®
XT, Audyssey Dynamic EQ
®
and Audyssey Dynamic
Volume
®
settings.
141
Manual EQ Uses the graphic equalizer to adjust the tone of each speaker. 143
.
Video
HDMI Setup Makes settings for HDMI video/audio output. 145
On Screen Disp. Configures the on-screen display settings. 147
TV Format Sets the video signal format to be output for the TV you are using. 148
Contents Connections Playback Settings Tips Appendix
Settings
128
Front panel Display Rear panel Remote Index

Denon AVR-X1100W Specifications

General

Receiver type	Surround
Audio output channels	7.1 channels
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Headphone connectivity	6.3 mm
Connectivity technology	Wired
Speakers connectivity type	Banana connector/Binding posts
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Ethernet LAN	Yes
AM band range	522 - 1611 kHz
Supported radio bands	AM, FM
Optical drive included	No
Display	VFL
Product color	Black
Audio decoders	Dolby Digital 5.1, Dolby Digital EX, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Digital Plus, DTS-ES, DTS-HD Master Audio
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	430 W

Weight and Dimensions

Depth	339 mm
Width	434 mm
Height	151 mm
Weight	8600 g