o
HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On: Use HDMI control function.
Off
(Default):
Do not use HDMI control function.
0
Please consult the operating instructions for each connected device to check
the settings.
0
Refer to “HDMI control function” for more information about the HDMI control
function. (
v
p. 117)
NOTE
If the “HDMI Control” settings have been changed, always reset the power to
connected devices after the change.
o
Pass Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last
(Default):
The most recently used input source will
go into standby mode.
CBL/SAT /
DVD/Blu-ray / Blu-ray /
Game / AUX /
Media Player:
Pass through the selected input source.
“Pass Source” can be set when “HDMI Control” is set to “On” or “HDMI
PassThrough” is set to “On”.
o
TV Audio Switching
Sets automatic switching to the “TV Audio” input when a TV connected
via HDMI sends an appropriate CEC control command to the AVR.
On
(Default):
Select the TV Audio input automatically
when receiving a command from the TV.
Off:
Do not select the TV Audio input
automatically when receiving a command
from the TV.
Contents Connections Playback Settings Tips Appendix
146
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
