EasyManuals Logo
Home>Denon>Receiver>AVR-X1100W

Denon AVR-X1100W User Manual

Denon AVR-X1100W
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #193 background imageLoading...
Page #193 background image
o
No sound comes out
Symptom Cause / Solution Page
No sound comes out of
speakers.
0
Check the connections for all devices. 28
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected.Check that cable core wires come in contact with the
metal part on speaker terminals.
28
0
Securely tighten the speaker terminals. Check speaker terminals for looseness.
28
0
Check that a proper input source is selected. 54
0
Adjust the volume. 55
0
Cancel the mute mode.
55
0
Check the digital audio input connector setting. 149
0
Check the digital audio output setting on the connected device. On some devices, the digital audio output
is set to off by default.
0
When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the
speaker terminal and SUBWOOFER connector.
15
No sound comes out when
using the DVI-D
connection.
0
When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a
separate audio connection.
Contents Connections Playback Settings Tips Appendix
193
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X1100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X1100W and is the answer not in the manual?

Denon AVR-X1100W Specifications

General IconGeneral
Receiver typeSurround
Audio output channels7.1 channels
Power output per channel (1KHz@6 Ohm)145 W
Power output per channel (20-20KHz@8 Ohm)80 W
HDMI in5
Digital audio optical in2
Ethernet LAN (RJ-45) ports1
Headphone connectivity6.3 mm
Connectivity technologyWired
Speakers connectivity typeBanana connector/Binding posts
Audio formats supportedAAC, AIFF, FLAC, MP3, WAV, WMA
Ethernet LANYes
AM band range522 - 1611 kHz
Supported radio bandsAM, FM
Optical drive includedNo
DisplayVFL
Product colorBlack
Audio decodersDolby Digital 5.1, Dolby Digital EX, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Digital Plus, DTS-ES, DTS-HD Master Audio
Apple docking compatibilityiPhone, iPod
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)430 W
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height151 mm
Weight8600 g

Related product manuals