Denon DN-2500F User Manual

(4)
Stopping Playback
There are two ways to stop playback.
Blinking
Figure 10
(5) Pausing
Press the PLAY/PAUSE button to switch between play and pause mode.
The PLAY/PAUSE
LED blinks when the pause mode is set.
Figure 11 shows the relationship between the play and pause.
The player has completed the cue or pause operation and is waiting for the play start command.
When the PLAY/PAUSE button is pressed, playback starts and the cue point is stored in the memory.
Playing
The pause mode is set when the PLAY/PAUSE button is pressed again.
Pausing
Playback resumes when the PLAY/PAUSE button is pressed again.
Playing
Figure 11
Press the PLAY/PAUSE
button during playback to pause at that point.
Press the CUE
button during playback to return to cue mode at the position at which playback started. (Back Cue)
14

Denon DN-2500F Specifications

Power

power supply for US and Canadian models	120 V AC + 10%, 60 Hz
power supply for European models	230 V AC + 10%, 50 Hz
power consumption	27 W

Operating Environment

operational temperature	5 to 36°C
operational humidity	25 to 85% (no condensation)
storage temperature	-20 to 60°C

Audio Specifications

quantization	18-bit linear per channel
sampling frequency	44.1 kHz
total harmonic distortion	0.006%

Weight and Dimensions

player unit dimensions	482 (W) x 88 (H) x 252 (D) mm
control unit dimensions	482 (W) x 132 (H) x 40 (D) mm
player unit weight	6 kg
control unit weight	3 kg