6
DISASSEMBLY
• Disassemble in order of the arrow in the following gure.
• In the case of the re-assembling, assemble it in order of the reverse of the following ow.
• In the case of the re-assembling, observe "attention of assembling".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
BATTERY MODULE
Refer to
"DISASSEMBLY
3. BATTERY MODULE"
and
"EXPLODED VIEW"
BATTERY MODULE
(Ref. No. of EXPLODED VIEW : A and C)
CX870 MODULE
Refer to
"DISASSEMBLY
2. CX870 MODULE"
and
"EXPLODED VIEW"
CX870 MODULE
(Ref. No. of EXPLODED VIEW : C and D)
CHARGER & AMPLIFIER
Refer to
"DISASSEMBLY
4. CHARGER & AMPLIFIER PWB UNIT"
and
"EXPLODED VIEW"
CHARGER & AMPLIFIER
(Ref. No. of EXPLODED VIEW : A)
TOUCH KEY PWB UNIT
Refer to
"DISASSEMBLY
5. TOUCH KEY PWB UNIT"
and
"EXPLODED VIEW"
TOUCH KEY PWB UNIT
(Ref. No. of EXPLODED VIEW : A)
DOCK CONNECTOR & OLED ASSY
Refer to
"DISASSEMBLY
6. DOCK CONNECTOR & OLED ASSY"
and
"EXPLODED VIEW"
DOCK CONNECTOR & OLED ASSY
(Ref. No. of EXPLODED VIEW : B)
SPEAKER DRIVER
Refer to
"DISASSEMBLY
7. SPEAKER DRIVER"
and
"EXPLODED VIEW"
SPEAKER DRIVER
(Ref. No. of EXPLODED VIEW : B)
BOTTOM COVER PUNCHING METAL
BATTERY LID FRONT CABINET
MAIN PWB UNIT
Refer to
"DISASSEMBLY
1. MAIN PWB UNIT"
and
"EXPLODED VIEW"
MAIN PWB UNIT
(Ref. No. of EXPLODED VIEW : C and D)