29
4. CD test mode
Startup display
"CD Test Mode" displayed for 5 seconds.
CD TEST MODE display
To exit this mode, unplug the power cord.
4.1. Before starting the test
Open the tray and set the disc.
Even if the disc is, the tray must let OPEN → CLOSE.
4.2. Servo check
Press
1
/
3
ENTER button. Execute the following steps.
*
1
/
3
ENTER button continuously for over 1 second to switch directly to SUB CODE readout in step
t
. Press the
SOURCE button to return to "0 CD TEST MODE".
q
LD ON
w
FOCUS ON
e
CLV ON
1
/
3
ENTER button
1
/
3
ENTER button
1
/
3
ENTER button
1
/
3
ENTER button