18
necessary, install additional lighting devices. In event of poor visibility due to severe weather
(Such as fog, snow, rain, and haze), stop the operations of machine till the visibility turns good.
Clean the windows, mirrors, lamps, and camera to keep good visibility. Adjust the mirrors and
camera to optimal positions to ensure that the driver sitting in the driver seat can see the rear
view (Blind spot).
The non-authorized modification or the installation of non-approved attachments may impair the
visibility of the operator.
No Riding on Machine
All personnel are prohibited to sit on any part of machine at any
time during traveling or operations of machine.
Checking for Safe and Reliable Working Zone before
Operations
Verify the performance limits of machine.
Set up a signaler at the road shoulders, narrow places, or vision-
obstructed places.
Do not allow any person to access the turning radius or path of
machine.
Sound the horn to indicate your movement intention.
There are blind zones behind the machine. Before driving
backward, check the safety in the area behind machine and ensure there is no person behind the
machine.
Checking of Chassis (Tracks) before Traveling
Bulldozing blade
Before operating the traveling joystick/pedal, ensure that
the bulldozing blade is in front of the driver seat. Please
bear in mind that the operation direction of the traveling
joystick/pedal with bulldozing blade behind the driver
seat is reverse to that with bulldozing blade in front of
driver seat.
To Next Page
Loading...
Need help?
General