33
Use a flashlight to check the electrolyte
level.
Ensure to turn off the starter switch and
stop the engine before checking or handling
battery.
Never touch the electrodes by any metal
tool or object, in order to prevent short-
circuit.
The loose electrodes can generate electric
spark. Ensure to tighten any loose electrode.
Ensure that the battery cover is securely
covered.
If the battery is frozen, do not charge the battery or attempt the jumper start of engine,
otherwise it may cause explosion. Before use, heat the frozen battery to 15°C.
Do not use the battery when the electrolyte level is below the lower limit. Otherwise, it will speed
up the internal aging and shorten the life of battery. In addition, it can lead to burst (explosion).
Do not fill the distilled water till the level is above the upper limit. Otherwise the electrolyte will
leak out. The contact with such electrolyte can harm your skin or corrode the machine parts.
Clean the surrounding area of electrolyte level marking by a wet cloth and check the level. Do not
clean by a dry cloth, otherwise it can cause electrostatic accumulation and combustion or
explosion.
Periodically Replaced Critical Safety Parts
To guarantee the safe operation of machine for a longer time, add the oil and fulfill the checking
and maintenances periodically. To promote the safety, periodically replace the critical safety
parts, including hoses and seat belts. To understand more details, please refer to the section
“Periodically Replaced Critical Safety Parts”.
“Periodically replaced critical safety parts” refers to the parts aged, worn, and functionally
deteriorated after repeated use. The performances of such parts will change along with time.
These characteristics of such parts can cause serious mechanical damages or personal harm and
the remaining lives of such parts can’t be judged by merely appearance checking or operation
hand-feel.
Upon detection of any visible damage on the appearance, please replace the “Periodically
replaced critical safety parts”, even if the designated replacement period is not reached.
Jumper Start with Battery Charging Cable
To start the engine by battery charging cable, ensure to connect the cable correctly as per
following procedure. The incorrect connection of cable can cause discharging and battery
explosion.
Keep the “Malfunctioned machine” and “Rescue machine” away from mutual contact.
To Next Page
Loading...
Need help?
General