27
Do not operate the lifting if there is any operator on the machine.
Operate slowly during lifting to prevent the rollover of machine.
During lifting, keep all personnel away from working zone. Do not move the machine over any
person.
Safe Transport of Machine
During the transport of machine, understand and abide by all applicable safety rules, vehicle
codes, and traffic regulations.
Take the length, width, height, and weight of the transport truck with loaded machine into
consideration, in order to select the best transport route.
During the transport, do not start up or stop the transport truck suddenly or drive at high speed.
Otherwise, it will result in movement or unbalance of loaded machine.
Precaution for Maintenances
Warning Information of “No Operation” Sign
The checking or maintenances of machine, the start of engine or the touch of any joystick by non-
authorized personnel may result in serious injury accidents. Before maintenances, please stop the
engine and withdraw and carry the key.
Affix warning information “No Operation” to an eye-catching place such as starter switch and
joystick.
Use of Correct Tools
Do not use any damaged or deteriorated tool or any tool designed
for other application. Use tools suitable for related operations.
Periodically Replaced Critical Safety Parts Replace the fuel hoses
periodically. The fuel hoses will wear gradually along with time,
even if no wear symptom is visible.
Upon detection of any wear symptom, replace the fuel hose,
regardless of the replacement schedule.
To understand more details, please refer to the section “List of
Critical Safety Parts”.
Explosion-Proof Lamps
While checking the fuel, lubricating oil, coolant, and battery electrolyte, please use explosion-
proof lamps to prevent fire and explosion. Otherwise, it may result in explosion to cause serious
injury accidents.
To Next Page
Loading...
Need help?
General