Digi Connect and ConnectPort TS Family web interface Administration
Digi Connect Family and ConnectPort TS Family
111
IP statistics
n Datagrams Received/Datagrams Forwarded: Number of received or forwarded datagrams.
n Forwarding: Displays whether forwarding is enabled or disabled.
n No Routes: Number of outgoing datagrams for which no route to the destination IP can be
found.
n Routing Discards: Number of discarded outgoing datagrams.
n Default Time-To-Live: Number of routers an IP packet can pass through before it is discarded.
TCP Statistics
n Segments Received/Segments Sent: Number of received or sent segments.
n Active Opens: Number of active opens. In an active open, the Digi Connect and ConnectPort TS
Family product initiates a connection request with a server.
n Passive Opens: Number of passive opens. In a passive open, the Digi Connect and ConnectPort
TS Family listens for a connection request from a client.
n Bad Segments Received: Number of segments received with errors.
n Attempt Fails: Number of failed connection attempts.
n Segments Retransmitted: Number of retransmitted segments. Segments are retransmitted
when the server does not respond to a packet sent by the client. A retransmit limits the
number of lost and discarded packets.
n Established Resets: Number of established connections that have been reset.
UDP Statistics
n Datagrams Received/Datagrams Sent: Number of datagrams received or sent.
n Bad Datagrams Received: Number of bad datagrams received. This number does not include
the value contained by NoPorts.
n No Ports: Number of received datagrams that were discarded because the specified port was
invalid.
ICMP Statistics
n Messages Received: Number of messages received.
n Bad Messages Received: Number of received messages with errors.
n Destination Unreachable Messages Received: Number of destination unreachable messages
received. A destination unreachable message is sent to the originator when a datagram fails to
reach its intended destination.
Wi-Fi LAN Statistics
n Status: The current status of the wireless Digi device, which may include:
l Not Connected: not associated or connected w/ any access point, perhaps because the
wireless device has not fully initialized, is out of range, or the wireless interface is
disconnected because the Ethernet interface is enabled.
To Next Page
Loading...
Need help?
General
