Digi Connect ME User Manual

Digi Connect and ConnectPort TS Family web interface Configuration through the web interface
Digi Connect Family and ConnectPort TS Family
35
Configuration through the web interface
Use the options under Configuration to configure settings for various features, such as network
settings and serial port settings.
Network configuration
The Network Configuration page includes:
n IP settings: For viewing IP address settings and changing as needed.
n WiFI IP settings: Configure the IP address used for wireless LAN communication. See Wi-Fi IP
settings for more information.
n WiFI LAN settings: Configure basic settings for wireless LAN devices such as network name
and network connection options. See Wi-Fi LAN settings for more information.
n WiFi Security settings: Configure authentication and encryption settings for wireless LAN
devices. See Wi-Fi security settings for more information.
n WiFi 802.1x Authentication settings: Configure IEEE 802.1x authentication settings for
wireless LAN devices. See Wi-Fi 802.1x authentication settings for more information.
n Network Services settings: Configure access to various network services, such as ADDP,
RealPort and Encrypted RealPort, telnet,HTTP/HTTPS, and other services. See Network
Services Settings for more information.
n IP Filtering settings: Configure the IPsettings for a Digi Connect and ConnectPort TS Family
device to only accept connections from specific and known IP addresses or networks. See IP
filtering settings for more information.
n IP Forwarding settings:
l Configure the IPforwarding settings for a Digi Connect and ConnectPort TS Family device
to forward certain connections to other devices. This is also known as Network Address
Translation (NAT) or Port Forwarding.
l Configure the built-in firewall functionality to limit IP traffic to and from certain networks,
TCP or UDP ports, and interfaces. This feature is based on Linux tool iptables. See IP
filtering settings for more information.
n Advanced Network Settings: Configure the Ethernet Interface speed and mode, IP settings,
TCP keepalive settings, and DHCP settings. See Advanced Network Settings for more
information.
IP SettingsEthernet Uplink IP Settings (for Connect ES 4/8 SB with Switch)
The IP Settings page allows you to configure how to obtain the IP address of the Digi Connect and
ConnectPort TS Family device. You can use one of the following methods to obtain the IPaddress:
n DHCP
n Static IP address
n Subnet mask
n Default gateway

Digi Connect ME Specifications

General

Brand	Digi
Model	Connect ME
Category	Network Hardware
Language	English