Name: Digi Connect ME
Brand: Digi
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Digi Connect and ConnectPort TS Family command-line interface Configuration through the command line

Digi Connect Family and ConnectPort TS Family

115

Configuration through the command line

You can configure the Digi Connect and ConnectPort TS Family product by entering a series of

command to set values through the command-line interface.

Access the command-line interface

To access the command-line interface and send configuration commands to the Digi Connect and

ConnectPort TS Family device:

1. Launch the command-line interface by using the telnet command.

2. To launch the CLI via telnet, issue the following telnet command from a command prompt on

another networked device, such as a server:

#> telnet

ip-address

Replace ip-address with the IP address of the Digi Connect and ConnectPort TS Family device.

For example:

#> telnet 192.3.23.5

If security is enabled for the Digi Connect and ConnectPort TS Family device, a login prompt

appears for telnet access. If you do not know the user name and password for the device,

contact the system administrator who originally configured the device.

Basics for using the command-line interface

The Digi Connect and ConnectPort TS Family offers online help for CLI commands. Use the following

command examples to get help for using commands.

n help displays all supported commands for a device.

n ? displays all supported commands for a device.

n set ? displays the syntax and options for the set command. Use this command to determine

whether the device includes a particular set command variant to configure various features.

n help set displays syntax and options for the set command.

n set serial ? displays the syntax and options for the set serial command.

n help set serial displays the syntax and options for the set serial command.