Digi One IAP User Manual

Contents
About the Digi One IAP
Key Features 5
Flexible Industrial Automation support 5
Serial port and network protocol support 6
Package contents 7
About the Digi One IAP documentation 7
Other guides and references 8
Additional software, utilities, and other resources on Digi website 8
Configure the Digi One IAP using IAprofiles
About IA configuration profiles 9
Key terms in IA configuration profiles 9
Serial bridge profile: master and slave connected to Digi ports 10
Modbus profile: serial-connected slave 11
Modbus profile: serial-connected master 12
DF1 profile: serial-connected slave 12
DF1 profile: serial-connected master 13
Omron family profile: serial-connected slave 13
Omron family profile: serial-connected master 14
Other serial port protocol profile: serial-connected slave 15
Other serial port protocol profile: serial-connected master 15
Configure a serial-connected slave: generic procedure 16
Configure a serial-connected master: generic procedure 16
Configure a serial-connected master: TCP/UDP sockets 16
Configure a serial-connected slave: other IA protocol 16
Configure a serial-connected master: other IAprotocol 17
Set up COMport redirection 18
Administration tasks
Log in as the Administrator 20
Update firmware 20
Update POSTcode 21
Reset the Digi One IAP configuration to factory defaults 21
Reset the Digi One IAP from the web interface 21
Reset the Digi One IAP from the command line 21
Reset the Digi One IAPusing the reset button 22
Enable pass-through port 22
Enable the pass-through port 22
Digi One IAP Family User Guide
3

Digi One IAP Specifications

General

Brand	Digi
Model	One IAP
Category	Server
Language	English