Chapter 2
Configuring the IP Address 15
arp -s ip-address mac-address
Example
arp -s 192.168.2.2 00-40-9D-00-00-00
2. Ping the Digi device using the IP address just assigned.
ping 192.168.2.2
Note: The ping will probably time out before there is a
response from the device server. Wait a few sec-
onds and then ping the device server again, which
will respond, indicating that the IP address has
been configured.
Changing an IP Address from a Web Browser
Prerequisite
This procedure assumes that the device server already has
an IP address and you simply want to change it.
Procedure
1. Open a web browser and enter the device server’s current
IP address in the URL window.
2. When the device server prompts you to log in, specify the
following:
• root as the user name
• The root password. The default is dbps.
3. Choose Configure > Network to access the Network Con-
figuration page.
4. Enter an IP address (and other network-related parame-
ters) and then choose Submit to save the configuration.
To Next Page
Loading...
Need help?
General