Chapter 3
Setting Up RealPort Com Redirection 19
RealPort Setup Overview
To set up a RealPort configuration, complete the following
tasks:
1. Configure the device server’s port for RealPort. See "Con-
figuring the Device Server Port for RealPort" on page 19.
2. Install the RealPort software on a network-based PC. See
"Installing RealPort on a Windows System" on page 20.
For UNIX RealPort software and documentation, see the
Digi web site (www.digi.com).
Configuring the Device Server Port for RealPort
1. Access the configuration by opening a web browser and
entering the device server’s IP address in the URL win-
dow.
2. Sign on to the device server as the root user (root). The
default root password is dbps.
3. From the main menu, choose Configure > Port.
4. Set the Device type field to Printer.
Note: No other serial communication settings are
required.
5. Choose Submit to commit the configuration.
To Next Page
Loading...
Need help?
General