Digi One SP User Manual

Chapter 2
16
Testing the IP Address Configuration
Testing the IP Address Configuration
Use this procedure to test your IP address configuration.
Prerequisite
This procedure assumes that you have configured the device
server with an IP address.
Procedure
1. Access the command line of a PC or other networked
device.
2. Issue the following command:
ping ip-address
where ip-address is the address you assigned to the
device server.
Example
ping 192.168.2.2
A reply should be returned.

Digi One SP Specifications

General

Brand	Digi
Model	One SP
Category	Server
Language	English