Chapter 5
Administration
35
Upgrading Firmware
This procedure shows you how to download firmware using
either HTTP or TFTP.
Note: HTTP, which simply requires a web browser, is the preferred
method, and Digi recommends it. TFTP, however, is often
used in UNIX environments, so TFTP is supported as well.
Prerequisite
This procedure assumes that:
• You have already downloaded the firmware file from the
Digi web site
• TFTP is running (if you are using the TFTP option)
Procedure
1. Open a web browser and enter the device server’s IP
address in the URL window.
2. When the device server prompts you to log in, enter the
following:
• root as the user name
• The root password. The default is dbps.
3. Choose Admin > Upgrade from the main menu.
4. Follow the prompts.
To Next Page
Loading...
Need help?
General