Digital-Ally DVM-500 User Manual

DVM-500 User’s Guide Digital In-Car Video System
Digital Ally DVM User Guide Rev. F (334/1.6.2) Page 31 of 36
Front Camera Focus
Menu Item Settings Default
AutoFocus AUTO ZOOM/1 NA
Manual Focus (Near/Far) DOWN/4 and UP/5 NA
Save Settings MENU/6 Button NA
Default Zoom 1x, 2x, 3x, 4x, 5x 2x
Cancel and Exit STOP/3 Button NA
AutoFocus
Aim the main camera at a target approximately (30) feet away, and
then press the AUTO ZOOM/1 button to engage AutoFocus. Press the
MENU/6 button to save the setting, or press the STOP/3 button to
cancel and exit.
Manual Focus
Set the main camera focus manually by using the DOWN/4 and UP/5
buttons. Press the MENU/6 button to save the setting or press the
STOP/3 button to cancel and exit.
Default Zoom
The factory default zoom level for the Main camera is 2x. This enables
the Main camera to resolve details in the video with higher clarity
(such as a license plate number). At 1x zoom level, the hood of the
vehicle is visible, but at 2x zoom level, the hood is not visible. Set the
zoom level by pressing the ZOOM/2 button until the desired number is
displayed onscreen, and then press the MENU/6 button to save the
setting, or press the STOP/3 button to cancel and exit.
Reset to Factory Defaults
Use this option to reset all system settings to factory defaults. Turn the
DVM off/on for the new settings to take affect.

Digital-Ally DVM-500 Specifications

General

Brand	Digital-Ally
Model	DVM-500
Category	Car Video System
Language	English