The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confi dential. Any disclosure, copying, distribution to third
party
is strictly prohibited.
20
Time and Date se ng
How to set the taximeter’s me and date
In the normal posi on “For Hire”.
Insert the Service Programming Key (1)
Press K1 and K3 at the same me.
The main display (3) will show “TIME”
for a few seconds.
The main display (3) shows in the le digits the day number and in
right digits the month in ddmm format.
The secondary display (5) shows in the le the hour number and in
right digits the minutes numbers in its format
To set the Day number press K1 bu on.
(only increasing way)
To set the Month number press K2 bu on.
(only increasing way)
To set the Hour press K3 bu on.
(only increasing way)
To set the Minutes press K4 bu on.
(only increasing way)
Press OP bu on to enter in the Year programming.
To decrease the Year number press K1 bu on.
To increase the Year number press K2 bu on.
Press K3 bu on to set the taximeter manufacturing year.
Press OP bu on to end the programming procedure and go back
to For Hire posi on and take out the Service Programming Key (1)
Hour
15 05 16-40
2009
2011
FOR HIRE
FOR HIRE
TIME
Day Month
Hour Minutes
14 04 16-40
2010
Year
2010
15 05 16-40
Minutes
Day
15 04 16-40
Month
15 05 16-40
To Next Page
Loading...
Need help?
General
