Digitax M1 mdt User Manual

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confi dential.
Any disclosure, copying, distribution to third
party is strictly prohibited.
25
“Trip by Trip”
Events Memory Buff er
The “Trip by Trip” is a long memory buff er where the taximeter store the events informa ons (trips, shi s, etc.). It
can be able to record and store, depending the buff er version,  ll 9000 events.
It’ s a F.I.F.O. Memory kind (First in - First out): the last event recorded that exceed the memory events number take
the place of the fi rst recorded event. If tariff ques on n°314=yes , the taximeter is blocked when the F.I.F.O. buff er is
full and records are not deleted.
It can be possible to print out all the events or print events star ng from the last print out.
How to print out all “Trip by Trip” memory content
How to print “Trip by Trip” events star ng from the last print out
STATIS
STATIS
1
1
1 1
1 1
0
0
1 2
1 3
0
0
1 2
1 3
FOR HIRE
FOR HIRE
FOR HIRE
FOR HIRE
Memory Data
Memory Data
Memory Block
Memory Block
Memory Loca on
Number
Memory Loca on
Number
Trip by Trip Memory
Loca on
Trip by Trip Memory
Loca on
Select For Hire posi on.
Be sure printer is connected and Powered ON
Press K1 and K2 at the same  me.
The Main display (3) will show “Sta s” for a few seconds.
The secondary display (5) will show: in the le digit the block (1 o 2)
and in the right digit the number of block loca on (1-45).
The main display (3) will show in the right digits the selected loca-
 on data value.
Press K2 bu on to reach the Memory loca on n. 2
Press K4 bu on to print out all the “Trip by Trip” memory loca on
Content.
Press OP bu on to end the print out procedure and go back
to For Hire posi on.
Select For Hire posi on.
Press K1 and K2 at the same  me.
The main display (3) will show “STATIS” for a few seconds.
The secondary display (5) will show: in the le digit the block (1 o 2)
and in the right digit the number of block loca on (1-45).
The main display (3) will show in the right digits the selected loca-
 on data value.
Press K2 bu on to reach the Memory loca on n. 3
Press K4 bu on to print out all the “Trip by Trip” memory loca on
Content from the last print out procedure.
Press OP bu on to go back to For Hire posi on.

Digitax M1 mdt Specifications

General

Brand	Digitax
Model	M1 mdt
Category	Automobile Accessories
Language	English