Ta l ker™
The Talker™ is an effect designed exclusively by DigiTech, that lets your instrument speak. The
Ta lker™ requires a microphone be connected to the Mic Input on the rear panel of the GNX3. As
you speak into the microphone, your instrument mimics what you say. The Talker™ effect is output
only at the 1/4” left and right outputs. When the Talker™ is bypassed, the mic signal is passed from
the XLR mic input to the XLR mic output unaffected. There are five Talker™ types.
Ty pe - The Parameter 4 knob is used to select the 5 Talker™ types. Talker types range from
talker 1 (deep tonal characteristics), to talker 5 (bright tonal characteristics).
Sensitivity - The Parameter 2 knob adjusts the microphone sensitivity. The input level from your
microphone must be loud enough for the Talker™ to work properly. If the
microphone input is too weak, the Talker™ will have trouble tracking. If the input is
too strong, the Talker™ will clip making the words unintelligible.The Mic Sensitivity
ranges are from 1 (least sensitive) to 99 (most sensitive).
Stomp Box Modeling
The GNX3 Stomp Box Modeling emulates the tones of the most popular distortion boxes ever used
including the DOD OD250, Boss DS-1,Arbiter Fuzz Face, Electro Harmonix Big Muff, ProCo RAT, DOD
Grunge, Boss Metal Zone, Ibanez TS-9,Voodoo Labs Sparkle Drive, and the Guyatone OD-2*.
*Arbiter, Boss, Electro-Harmonix, ProCo, Ibanez,Voodoo Labs, Guyatone, DS-1, Fuzz Face, Big Muff, RAT, Metal Zone,TS-9, Sparkle Drive, and
OD-2 are trademarks of their respective companies and are in no way associated with DigiTech
Stomp Box On/Off - The STATUS button turns the Stomp Box (Stompbox) Modeling on and off.
Stomp Box Type - The Parameter 1 knob selects the type of stomp box to be used. Choices include:
Screamer - Based on an Ibanez TS-9 Big MP - Based on the Electro Harmonix Big Muff Pi.
Fuzzy - Based on an Arbiter Fuzz Face Guy OD - Based on a GuyaTone OD-2
DOD 250 - Based on a DOD Overdrive 250 Rodent - Based on a Rat distortion
Grunge - Based on a DOD Grunge™. SprkDriv - Based on a Voodoo Labs SparkleDrive.
DS Dist - Based on a Boss DS-1. Zone - Based on a Boss Metal Zone.
Type Gain Param1 Param2 Param3* Param4* Level
Screamer drive tone level
Rodent dist filter volume
DS Dist dist tone level
DOD 250 gain level
Big MP sustain tone volume
Guy OD drive level
Sparkdrv gain tone clean volume
Grunge grnggain butt face loud
Fuzzy fuzz volume
Zone dist mid freq mid lvl low high level
Gain - Controls the amount of distortion or gain in the Stompbox model. Range is 0-99
Param1 - A tone control for the Stompbox model. Range is 0-99
Param2 - A second Tone control for the Stompbox model (not available in all models). Range is 0-99
*Param3 - Controls the Mid Frequency in the Zone stompbox model. Range is 0-99
*Param4 - Controls the Mid Level in the Zone stompbox model. Range is 0-99
Level - Controls the output level of the Stompbox model. Range is 0-99
* These Parameters are only available using the G
ENEDIT™computer editor software.
EQ
22
Effects and Parameters
To Next Page
Loading...
Need help?
General
