15
Copyrighted by AmperorDirect.com
6. If your SSID does not automatically appear, select SCAN to bring up the list of available
networks.
If your SSID still does not appear, use the number pad to enter the name of your SSID and your
Security information.
7. Press the Up and Down Arrows to browse for the desired network.
8. Press the ENTER button on the remote to confirm.
9. Select the Select button to confirm.
10. Configure the Security and Key information if necessary.
11. Press the Save button to save the changes.
Note: If the wireless adapter is removed and then reinserted, you will need to reconfigure wireless.
NMT Applications
The majority of the HDX 1000 functions are application based. You will need to start the applications in
Setup in order to use services such as FTP, torrents, and myiHome Server. I recommend that you start all
available applications. However, before you start running the applications you may want to change the
Device Name, Samba Workgroup, and password to make the HDX easier to access over the network.
You will need to change the Samba Workgroup to the same name as Workgroup associated with your
other networked devices.
1. Setup > NMT Applications
2. Using the Arrow buttons, navigate to each start button for each application.
To Next Page
Loading...
Need help?
General
