23
Copyrighted by AmperorDirect.com
7. Click the Next button to continue.
8. Type in the desired name for the network place and click the Next button to continue.
9. Click the Finish button to close the wizard once the network place has been successfully created.
Access using an FTP Service (FileZilla)
When you install the NMT application package on the internal hard drive, you also install an FTP server.
Before you can use the FTP server on the HDX 100, you will need a FTP client application installed on
your PC. I recommend using FileZilla (http://filezilla-project.org/
) to make the ftp tasks easier.
1. Open FileZilla after you have installed the application.
2. Type the following server / login information into FileZilla Site Manager:
• Host: “HDX 1000 IP address”
• Username: ftpuser
• Port: 21
• Password: 1234
3. Click the Connect button. You should now be able to access your HDX 1000.