Getting Started
Making Connections
There are several different connection options available with the RP100 Artist. Before connecting
the RP100 Artist, make sure that the power to your amplifier and the RP100 Artist is turned off.
There is no power switch on the RP100 Artist.To turn the RP100 Artist on or off, connect or
disconnect your instrument to the Input Jack (for battery power) or connect the included
PS0913B power supply from the Power Jack to an AC outlet (for AC power).
Mono Operation
Connect your guitar to the Input of the RP100 Artist. Connect a single mono instrument cable
from the Stereo Output of the RP100 Artist to the instrument input on your amplifier, or to
the line input of a power amp.
6
To Next Page
Loading...
Need help?
General
