Stereo Operation
For stereo operation connect the guitar to the Input of the RP100 Artist. Connect a TRS stereo
“Y” cord to the RP100 Artist’s Stereo Output. Connect one end of the “Y” cord to the input
of one amplifier, channel of a mixer, or power amp. Connect the second end of the “Y” cord to a
second amplifier, second channel of a mixer, or power amp. If connecting to a mixing console, set
the pan controls of the mixer hard left and right in order to retain stereo separation and be sure
to engage the RP100 Artist’s Cabinet Emulator. See page 18 for more on selecting the Cabinet
Emulator.
NOTE: When using a guitar amp, it may be best to connect the guitar to the input of the RP100
Artist and the Output of the RP100 Artist to the effect return of the amplifier.
7
To Next Page
Loading...
Need help?
General
