EasyManuals Logo
Home>DigiTech>Music Pedal>RP100A

DigiTech RP100A User Manual

DigiTech RP100A
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Pickup/Wah
The Pickup Simulator lets you get the thick tone of a humbucker pickup from a guitar with
single coil pickups, or the bright edgy sound of a single coil pickup from a guitar with a
humbucker.This allows you to have the best of both worlds without having to change guitars
during a performance.
Wah is an effect controlled by an Expression Pedal making the guitar sound as if it’s saying “Wah.
Pickup Type - The Parameter 1 knob selects the Pick Up type which will be simulated.
of - Turns the Pickup Simulator off.
hb - Gives a single coil pick up the warm tone of a humbucker.
sC - Gives a humbucker the unique sound of a single coil.
Wah Type - The Parameter 2 knob selects the Wah Type.
of - Turns the Wah Effect off.
cr - Cry Wah is a traditional sounding Wah.
bt - Boutique Wah is a wider sweeping Wah with a more modern sound.
fr - Full Range Wah sweeps the entire spectrum of audible frequencies.
Wah Position - The Parameter 3 knob adjusts the Wah Pedal Position. Ranges from 0 (toe
up) to 99 (toe down).
Compressor
A Compressor is used to increase sustain, tighten up guitars, and prevent the signal from clip-
ping the input of other effects. It sets a maximum boundary for the strength of a signal.
Comp Type - The Parameter 1 knob selects the Compressor Type (Attack).
of - Turns the Compressor off.
1 to 3 - Controls the length of time it takes for the Compressor to respond to
a signal exceeding the boundary.
16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DigiTech RP100A and is the answer not in the manual?

DigiTech RP100A Specifications

General IconGeneral
BrandDigiTech
ModelRP100A
CategoryMusic Pedal
LanguageEnglish

Related product manuals