DigiTech RP100A User Manual

Factory Reset
This function resets the RP100 Artist to its original factory settings.This procedure will erase all
custom user Presets, and recalibrate the Expression Pedal.
ATTENTION: Performing this function will erase all user-programmed data. All such data
will be lost forever! Be sure you want to erase the memory and start fresh
before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Disconnect the power supply from the RP100 Artist (AC Power) or unplug the guitar from the
input jack (battery power).
2. Press and hold the Select button while re-connecting the power or plugging your guitar into
the RP100 Artist’s input.
3.When the display shows --, release the button and press then press the Store button. The
display will then read rEand the RP100 Artist will reset to the original factory settings.
26

DigiTech RP100A Specifications

General

Brand	DigiTech
Model	RP100A
Category	Music Pedal
Language	English