Of - Turns the Noise Gate off.
ng - Selects the Silencer™ Noise Gate.
A1 to A9 - Selects the Auto Swell volume swell effect. These settings will auto-
matically ramp up the volume from a 200 milliseconds volume fade in
to 2 second volume fade in.
Gate Thresh - The Parameter 3 knob sets the signal strength (Threshold) required to open
or close the Noise Gate.The Gate Threshold parameter ranges from 1 (opens
easily) to 40 (requiring strong signals to open).
Effects
The Effects row in the RP100 Artist is a multi-function module, allowing you to select effects
such as; Chorus, Flanger, Phaser,Tremolo, Panner, Rotary Speaker,Vibrato,AutoYah™, Envelope,
Pitch Shift, Detune, and Whammy™ effects. When the Effects row is selected, the Parameter 3
knob is used to choose the type of Effect to be used. Only one of the effects in this row can be
used at a time. After selecting the type of effect in this module, the Parameter 1 and
Parameter 2 knobs can then be used to adjust the individual parameters associated with the
selected effect.The following list describes each Effect and their parameters in more detail:
Chorus (CH)
A Chorus adds a short delay to your signal.The delayed signal is modulated in and out of tune
and then mixed back with the original signal to create a thicker sound.
Amount - The Parameter 1 knob simultaneously adjusts the rate (Speed) and intensity
(Depth) of the modulation. Ranges from 1 to 99.
Level - The Parameter 2 knob controls the mix level of the Effect. Ranges from 0 to 99.
19
To Next Page
Loading...
Need help?
General
