EasyManuals Logo
Home>DigiTech>Music Pedal>RP100A

DigiTech RP100A User Manual

DigiTech RP100A
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Delay
Delay is an effect that will record a portion of the incoming signal, and then play it back a short
time later.The recording can repeat just once or several times.
Type/Level - The Parameter 1 knob selects one of the 3 different types of Delay, as well as
the volume level of the Delay.
OF - Turns the Delay Effect off.
1d through 9d - These are Digital Delays with Level control.
1A through 9A - These are Analog Delays with Level control.
1P through 9P - These are Ping Pong Delays with Level control.
Delay Time - The Parameter 2 knob adjusts the amount of Delay time. Ranges from 1
through 99(10 through 990 ms), and 1 and 2(1 and 2 seconds).
Delay Feedback - The Parameter 3 knob adjusts the number of repeats. Ranges from 0 to 99.
Reverb
Using reverb in recorded program material gives the listener a sense that the material is being
performed in an actual room or hall. It is this similarity to actual acoustic spaces that makes
reverberation a useful tool in recorded music.
Reverb Type - The Parameter 1 knob selects the Type of Reverb or acoustic space.
Decay - The Parameter 2 knob adjusts the length of the Reverb. Ranges from 1 to 99.
Reverb Level - The Parameter 3 knob adjusts the volume of the Reverb. Ranges from 0 to 99.
24
St=Studio
ro=Wood Room
CL=Club
PL=Plate
HA=Hall
AP=Amplitheater
CH=Church
gA=Parking Garage
Ar=Arena
SP=Spring

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DigiTech RP100A and is the answer not in the manual?

DigiTech RP100A Specifications

General IconGeneral
BrandDigiTech
ModelRP100A
CategoryMusic Pedal
LanguageEnglish

Related product manuals