Base Screw Holes
Base Screw Holes
11
If you prefer to mount the Joey, the base can be mounted onto a surface
either vertically or horizontally with screws.
Note: However the Joey is mounted, the vents on its top must be clear.
Place the base on a at
surface. If desired, mount the
base onto the surface with the
enclosed four screws using
the base screw holes in the
corners.
Mounting Options for Joey
Secure the Joey into the base
(see Securing Joey to the Base
on page 10).
Mounting the Base to a Surface Horizontally
1
2
To Next Page
Loading...
Need help?
General
