Lookup Code
20
You can program your DISH remote to control another device, such as
a TV, DVD, Blu-ray Disc™ player, VCR, audio receiver, or ampliier.
The receiver scans the database of codes for the particular device and
tries each code. When you nd one that works, you save that code.
Typically, the TV mode button is programmed to a TV; the DVD mode
button is programmed to a DVD, Blu-ray Disc™ player, or VCR; and
the AUX button to a DVD, Blu-ray Disc™ player, VCR, audio receiver,
or amplier. However, each of the Mode buttons are programmable to
whatever device you select.
Turn the device and receiver on.
Press MENU and select Settings. From
the Settings screen, select Remote
Manager.
Select the TV Code, DVD Code, or AUX
Code option on the Remote Manager
screen. If programming in TV or DVD
Code, continue to step 4. If programming
in AUX Code, continue with this step.
For programming in AUX Mode only:
Scroll the Aux Device list to select and
highlight your device type. Select Next.
Select the Lookup Code option.
2
3
Programming Remote to Control
Another Device
4
To Next Page
Loading...
Need help?
General
