LOCATE
REMOTE
28
Locating the Remote
Press LOCATE REMOTE on the front panel
of the Joey.
If the missing remote control is paired to
this Joey and within radio frequency (RF)
range, there should be a series of tones you
hear to help nd the location of the remote.
It may take up to 30 seconds after touching
LOCATE REMOTE before you hear the
tones. Press any button on the remote to
turn off the Locate tones after nding the
remote.
If you do not hear any tones after pressing
LOCATE REMOTE, press the SYSTEM
INFO button on the front panel. The
System Info screen lists the paired
remote(s). If the remote control you want
to nd is not listed or it is not paired to the
Joey, using LOCATE REMOTE is not an
option.
If the remote control you want to nd is out
of RF range, LOCATE REMOTE is not an
option.
When you are looking for the remote, try the LOCATE REMOTE feature
on the front panel of the Joey.
1
2
To Next Page
Loading...
Need help?
General
