82
If the length of this portion is greater than
17.0 mm the waste paper will not fall into
the waste tray. Add a dummy cut so that
the length of the waste paper is less than
17.0 mm.
Example: If the length of the waste paper
is 30 mm: (Cut 2 is 100, and Cut 3 is 130)
A dummy cut (Cut 3) is added, such as;
Cut 2 at 100, Cut 3 at 115, and Cut 4 at
130, so that the waste paper will fall into
the waste tray.
Area where automatic
cutting can be done
Leading edge of the paper
First Cut
Last Cut
Specifications
How to do AUTO CUT
What is AUTO CUT?
Automatic cutting is done between the leading edge of the paper and the first cut and between the last cut and the
trailing edge of the paper. Automatic cutting is not done in any other positions.
AUTO CUT Conditions
If automatic cutting is turned on and the distance between the leading edge of the paper and the first cut is more than
17.0 mm or the distance between the last cut and the trailing edge of the paper is more than 21.0 mm.
Docu Cutter(HCEX) 6_70-84 03.12.8, 3:12 PM82
To Next Page
Loading...
Need help?
General
