3-19
Chapter 3 ADVANCED OPERATION
4. Cross Folding
Cross folding is to fold single-folded paper another time into two or three.
Cross fold
Cross single fold
Cross letter fold
●
The maximum paper thickness is 104.7 g/m²/28 lb. However, this thickness may differ
slightly according to various conditions such as environmental conditions (tempera-
ture, humidity), paper size, and paper ber direction.
● When the paper is cross folded, Σ folding (folding slippage in the horizontal) and fold-
ing misalignment along sides of paper may occur due to conditions such as environ-
mental conditions (temperature, humidity), paper size and paper ber direction. This is
not a malfunction of the machine.
folding
4-1. Cross Folding Standard Size Paper
The paper size that can be cross folded is A3, B4, A4 and B5/LD, LG, LT.
The following describes the cross single folding procedures of A3/LD size paper.
Only short edge feed is available for
cross folding.
1
Fold A3/LD size paper into two ac-
cording to Chapter 2 "BASIC OPERA-
TION" "1.Standard Folding of Stan-
dard Paper" ( p.2-2).
2
Press along the folded line of the
single-folded paper rmly with your
ngers to prevent the paper from
slipping and buckling in the horizon-
tal direction when folded.
To Next Page
Loading...
Need help?
General
