Eaton 9372-FB-P Series User Manual

69
INM MTL SUM5 Rev 7
DRAFT - 09 June 2021 DRAFT - 09 June 2021
28 GROUPS
The following settings are available under the “Groups” tab.
Each channel within the SmartAlarm can be linked to a single or multiple alarm groups.
Groups-1 to 8 are shown as standard and additional groups are available via the “View” –
“Advance View” menu.
Groups are typically used to provide summary alarm information for use with 3rd Party
devices (DCS/PLC/SCADA/Supervisor Consoles).
Channels can be assigned to a single or multiple groups using a left mouse click on the
associated tick-box.
To implement changes the user must select the “Conrm” icon and download the
conguration to the SmartAlarm using the “Tools” menu – “Send Settings” as
required

Eaton 9372-FB-P Series Specifications

General

Brand	Eaton
Model	9372-FB-P Series
Category	Lighting Equipment
Language	English