To Next Page

To Previous Page

INM MTL SUM5 Rev 7

DRAFT - 09 June 2021 DRAFT - 09 June 2021

19 REMOTE PUSHBUTTONS

Each SmartAlarm is equipped with ve optically coupled digital inputs which can be used with

normally open momentary pushbuttons to control the operational sequence of the annunciator. The

remote pushbuttons tab allows the user to change the function of a pushbutton if required.

A drop-down menu provided per pushbutton allows the user to select alternative functions. For

example System Test is used as standard but the user may prefer Lamp Test as an option.

once the alternative function has been selected the user will need to select “Conrm” and the

changes will need to be downloaded to the annunciator via the tools menu – “send settings”.

Any external pushbutton can be assigned to a pushbutton group and any channel can be set to

match the associated group.

For example:- Channel-1 to 4 can be set to Pushbutton Group-1 and the internal pushbuttons can

be set to control Pushbutton Group-1. Only alarms within the group would be controlled by the

internal pushbuttons.

The remaining alarms can be assigned to Pushbutton Group-2 and these can be controlled by

external pushbuttons if required.

Eaton Ex-Lite N User Manual

Other manuals for Eaton Ex-Lite N