Ecotech TRT Series User Manual

7.2 CLEANING



ATTENTION!!!ABSOLUTELYDONOTUSEWATERJETCLEANINGSYSTEMS.

7.3 LUBRICATION

Regularly lubricate/greasethe mechanicalcomponents that actuate themovingparts of themachine: chains,  gears, linkages,
etc.Forsuitablelubricants,contactyourreseller.

7.4 ORDINARYMAINTENANCE
Generallytheoillevelshouldbecheckedevery8hoursofrunningtime,whilsttheairfiltershouldbecleanedevery4hours,or
evenmoreoftenifworkinginaparticularlydustyenvironment.
Removeanycutgrassdepositsfromthemotorheadtoensurebetterairflow.
Forproperuse
ofthemachine,donoteverforcethemotor;ifwhitesmokebeginstocomeoutof theexhaust,itisnecessaryto
slowdown.

7.5 EXTRAORDINARYMAINTENANCE

Asktheresellertoperformtheseoperationsthatrequirespecificcapabilitiesandequipment.
Component to be
checked
Inspection Every10hours Every50hours
Every 100 hours /
year
Bladesbelt
Checkbelttension

Checkbeltwear
Replaceasnecessary.

Forwardmovement
engagementlever
Check that the machine does not move
forwardwiththeleverinneutral

Brake Checkefficiencyofthebrake

Frame Checkforrustand/orcracks

Safetywarnings
Check that they are in their proper place
andlegible

Guards
Check that these are secured in their
properplaceandingoodcondition.

Fueltankandlines
Check that there are no leaks and that
they are in good condition. Replace as
necessary.

Acceleratorcontrol Checkitsproperoperation

Blades
Check that they are securely fastened in
placeandingoodcondition
Replaceasnecessary.

Bladeengagementlever Checkthecorrectcabletension

Motor Refertothemotorinstructionmanual.

Table7‐1:ExtraordinaryMaintenance

Ecotech TRT Series Specifications

General

Brand	Ecotech
Model	TRT Series
Category	Brush Cutter
Language	English