TRT110‐135/TRT110‐135Swing
1. FUELTANKCAP
2. STARTERLEVER
3. THROTTLELEVER
4. HANDLEBARHEIGHTADJUSTMENT
5. RIGHTSIDEWHEELLOCK
6. BLADEENGAGEMENTLEVER
7. FORWARDMOVEMENTADJUSTMENT
8. GEARBOXLEVER
9. FORWARD MOVEMENT ENGAGEMENT
LEVER
10. LEFTSIDEWHEELLOCK
11. SLOPE ADJUSTME NT LEVER (ONLY Swing
VERSION)
12. MOTOR
AIRFILTER
13. CUTTINGHEIGHTADJUSTMENT
Figure3‐2:DetailsTRT110‐135/TRT110‐
135Swing
3.1 OPERATIONALPRINCIPLE
3.1.1 IntendedUse
The forestry mower shredder you have purchased was designed and manufactured for cutting grass/brambles/brush on
uncultivatedgroundandunderbrush,workinginextremeconditions.
The60‐110‐135versionsweredesignedandmanufactured
tooperateonlevelgroundwithamaximumslopeof15°,whilstthe
60‐110‐135 Swing versions were designed to work on a slope of up to 45°, always maintaining the motor aligned along the
horizontal(0°).
Thetechnicalperformanceindicatedinthismanualrefersexclusivelytonewproductsor
thosemaintainedefficient,following
theuse,inspectionandmaintenanceinstructions.
As for any mechanical equipment, proper maintenance and its being kept clean are required. Lubricate the machine as
indicated.Followthesafetymeasuresandindicationsdescribedinthismanualandillustratedontheadhesivesafetylabelsand
signsonthe
machine.
3.2 DIMENSIONS
Dimensions
Model Length(mm) Width(mm) Height(mm)
TRT60 1800 580 1020
TRT60Swing 1800 580 1020
TRT110 1950 920 1250
TRT110Swing 1950 920 1250
TRT135 2050 980 1250
TRT135Swing 2050 980 1250
Table3‐1:Dimensions
3.3 ENVIRONMENTALCONDITIONS
Theequipmentdoesnotrequireanyparticularenvironmentalconditions.Themachinemayoperateon drygrass,butalsoon
wetgrass,payingattention,ontheTRT60modelstoadjusttheopeningofthecuttingsdischargetoitswidestaperturesoasto
avoidthefoulingofthecuttingplatewiththeconsequentovertaxingofthemotor.
3.4 LIGHTING
Themachinewasdesignedandmanufacturedtoworkoutdoorswithnaturallight.Incaseofnighttimeoperationmakesure
thatsufficientartificiallightingissuppliedwithasourceofatleast150lux
(UNIEN12646‐2:2008).
To Next Page
Loading...
Need help?
General
