22
Standard CMOS Setup Page
This page displays a table of items defining basic information
about your system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Standard CMOS Setup
System Time: 00:00:10
System Date: Fri 10/24/2003
Primary IDE Master : Auto
Primary IDE Slave : Auto
Secondary IDE Master : Auto
Secondary IDE Slave : Auto
Floppy Drive A : 1.44 MB 3 1/2
Floppy Drive B : Disabled
Date & Time
These items set up system date and time.
IDE
Primary Master
Primary Slave
Secondary Master
Secondary Slave
These items configure devices connected to
the Primary and Secondary IDE channels.
To configure an IDE hard disk drive, choose
Auto. If the Auto setting fails to find a hard
disk drive, set it to User, and then fill in the
hard disk characteristics (Size, Cyls, etc.)
manually. If you have a CD-ROM drive,
select the setting CDROM. If you have an
ATAPI device with removable media (e.g. a
ZIP drive or an LS-120), select Floptical.
Floppy Drive A
Floppy Drive B
These items set up size and capacity of the
floppy diskette drive(s) installed in the
system.
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system
time.
Hel
Item
To Next Page
Loading...
Need help?
General
