35
Printing Fiery X3eTY pages
Printing Fiery X3eTY pages
The Control Panel allows you to print special pages that are included in the Fiery X3eTY
system software. These pages reside on the Fiery X3eTY HDD and include the Test Page,
Configuration page, Job Log, Control Panel Map, and Font List.
Printing the Configuration page
The Configuration page lists all the settings in effect from the current Setup. After you
have finished running Setup, print a Configuration page to confirm your settings. If the
Fiery X3eTY is rebooting, allow the Fiery X3eTY to reboot and return to Idle before
printing a Configuration page.
Before you perform any service procedure, you should print the Fiery X3eTY
Configuration page (if possible) so that you can return the settings to their former
configurations, if necessary.
After the connection to the network is made, the site administrator can customize Setup
options according to the network and user environment. Using the Configuration page as
a guide can help speed up this process. For more information, see Configuration and Setup
on the User Documentation CD.
Printing the Test Page
Before connecting the Fiery X3eTY to the network, print the Test Page. The Test Page is
a file that resides in the Fiery X3eTY. Output verifies that the Fiery X3eTY is functional
and connected properly to the print engine.
To Next Page
Loading...
Need help?
General
